HP Recovery Manager to Discs

If your computer with Vista-mill for the first time, create a recovery CD set does the whole picture. Plates for the survey launch (start) reset all equipment and restore the operating system and software to factory settings and system instability or damage. Although the procedures in the Compaq PC described with Windows Vista, some manufacturers have slightly different instructions, and evaluation.









step 1 Click Start>All Programs>Recovery Manager.
step 2 Select Recovery Manager. This will open Recovery Manager.  

 













step 3 Click the Advanced button. If a laptop battery, and it is plugged in before the next step.

 step 4 Select Recovery disc creation. Click Next. The Recovery Manager will begin creating the necessary files. This may take a while, so be patient until the bar has reached 100%.  


 step 5 They appear to read the table of requirements. Depending on how stations are used more or less may be necessary if you use the standard CDs, Recovery Manager requires more than less if you use the DVD.  











step 6 Insert a blank disc, after checking are known as "Recovery Disc 01" or "Recovery Disk 1 of the second optical drive of your computer automatically opens. When opened manually. Connect the optical drive, and then click Next.  

 step 7 understand and confirm that you want to perform the operation through the window, click Next.  















step 8 Wait Recovery Manager now creates the first album. This can be 20-40 minutes, because it draws together the picture, save the files and check files on the CD.  

 step 9 Remove the disc and insert after the first, when you click Next. continue to produce information, including the most recent file is ready for construction.  















step 10 Click Next when you remove the drive and click End session. Good luck, you will receive a set of recovery discs.

step 11 Use recovery discs to restore your computer if the failure or instability.  

Tip
* Many of the discs, which are necessary to either CD or DVD, varies greatly from all computers. Please describe the conditions for granting aid.
 * Please note that if you connected a laptop computer to create a recovery disk.
 * Remember to mark all the cards in numerical order, and they have created. If the time when the computer crashed, and you know what they are used for the recovery disks, the system can be very serious problems.
* A high-quality CD-R, DVD-R, DVD-R Dual Layer DVD + R or need DVD + R Double Layer handle (buy all the books separately for the computer).
* Rewritable (RW) are not compatible with the Recovery Manager software.
* A permit may ask yourself, create the computer administrator (except one), recovery discs. * The above statements are based on Compaq computer with Windows Vista is based, and is not intended for older versions of Windows XP. Recovery Disc Creator
* Sony is a rare, because a little bit. "I seek help from the Help menu, you can find a recovery CD Creator.
* Acer has a program called Acer eRecovery. This is not the same.
* Acer, the possibility of restoring the factory settings without a recovery CD. During the boot process, one of the following: CtrlF10 F10 [press account] CtrlF10. One of them will be able to start Acer eRecovery the screen to restore the system .

Warnings

* A set of recovery discs can be done on your computer, not to lose. Handle CD and store it in a safe place. 
  * However, all are not copied. Keep the original in a safe place, it can be very useful on a portable when traveling to restore the system if serious problems are copied occur outside the home. Students away from home and benefit from the idea that the discs are required to restore your computer after you remove the virus.